STANLEY BASIC PLANE PARTS

 

BAILEY, BED ROCK  & OTHER STANLEY BENCH PLANES

Bailparts1.jpg (40358 bytes)

**All Parts are Original/Vintage Equipment Manufacture**

-No Reproductions-

 
Part # Description Price
1 SINGLE PLANE IRON (2")  for No.4, 5, 24, 26, 35, 604, 605, A4, A5, S4 & S5 Planes only. Different vintages and trademarks available. Approx. 75% original length. User grade. No pitting. Call or email

                            click for >> Stanley Plane Iron Trademarks (Tms)

NOTE: Plane Iron Caps for iron bench planes will not work on wood bottom planes
2 PLANE IRON CAP (1-3/4")  for No.3 & 5-1/4, 603 & 605-1/4 Planes only. User grade. 15.95
2 PLANE IRON CAP (2")  for No.4 & 5, 604, 605, A4, A5, S4 & S5 Planes only. User grade.   **Always in Stock** 10.95
2 PLANE IRON CAP (2")  for No.4 & 5, Types 3 to 6 - (Tm L. BAILEY'S PATENT DEC. 24, 1867) Planes only.  Collector grade.  **Limited availability** 19.95
2 PLANE IRON CAP (2-1/4")  for No.5-1/2 (pre-1935 models), 605-1/2, Planes only. User grade.  Call or email
2 PLANE IRON CAP (2-3/8")  for No.4-1/2, 6,7, 604-1/2, 606, 607 & A6Planes only. User grade.  Call or email
2 PLANE IRON CAP (2-5/8")  for No.8 & 608 Planes only. User grade.  Call or email

NOTE: Plane Iron Caps for iron bench planes will not work on wood bottom planes
3 CAP IRON SCREW (holds the blade and cap iron together)....fits all Stanley Planes (None available for No.1 and No.113 Sidewheel Planes)        **Always in Stock** 4.95
4 LEVER CAP (2")  for No.4, 5 Bailey Planes, only.    **Mostly pre-1925, plain types available, >>>See *PIC* for sample Type Comparisons - prices quoted for other than plain types when available*. Call or email
4 LEVER CAP (2-3/8")  for No.4-1/2, 6 & 7 Bailey Planes, only. **Mostly pre-1925, plain types available, >>>See *PIC* for sample Type Comparisons Call or email
**All Parts are Original/Vintage Equipment Manufacture**
-No Reproductions-
5 LEVER CAP SCREW...slight variation of thread pitch for different frog plane types and vintages. >>>See *PIC* for Type Comparisons 8.95
6 FROG, (part # 8, Adjusting Nut/Brass, not included) complete: No.3, 5-1/4 Plane only. Types 10-15 >>>See *PIC* for Type Comparisons Call or email
6 FROG, (part # 8, Adjusting Nut/Brass, not included) complete: No.4, 5 Plane only, Types 10-15  **Specify plane type, describe in detail, markings** >>>See *PIC* for Type Comparisons Call or email
7 "Y" ADJUSTING LEVER...Original one piece cast iron...fits all Stanley Planes, except No.1. **Always in Stock** 10.95
8-RH-1" ADJUSTING NUT/BRASS   Small: 1" diameter, right-hand thread (turns counter-clockwise to advance blade)  **Not available for No.1, 2 and 602 Planes** 19.95
8-LH-1" ADJUSTING NUT/BRASS   Small: 1" diameter, left-hand thread (turns clockwise to advance blade) **Not available for No.1, 2 and 602 Planes** 15.95
8-LH-1-1/4" ADJUSTING NUT/BRASS   Large: 1-1/4" diameter, left-hand thread (turns clockwise to advance blade) 17.95
8X-LH ADJUSTING NUT BOLT/STUD: 3/16" diameter x 24 t.p.i.  Left-Hand Thread only   *PIC* 9.95
8X-RH ADJUSTING NUT BOLT/STUD: 25/128" diameter x 28 t.p.i.  Right-Hand Thread only   *PIC* 9.95
9 LATERAL ADJUSTING LEVER  (1908 and later, without patent dates. For earlier types with patent dates, call or email) 10.95
**All Parts are Original/Vintage Equipment Manufacture**
-No Reproductions-

HOW TO REPLACE A STANLEY LATERAL ADJUSTMENT LEVER

Place the replacement lever on frog and rivet pin, position the frog and lever pivot point in between bench vise jaws. Slowly close the jaws, being careful not to touch the actual frog casting, and compress the rivet and lever.  Repeat process if needed to make a firm placement.

 
10 FROG SCREWS/ pair, with washers                  **Always in Stock** 4.95
12 ROSEWOOD LOW KNOB, c.1895-1915. User grade: some dents, scratches. **Limited availability**  **Specify plane model No.  **Not available for No.1, 2 and 602 Planes** 19.95
13 HANDLE BOLT & NUT    **Specify plane model No.  **Not available for No.1, 2 and 602 Planes**                                     **Always in Stock** 4.95
14 KNOB BOLT & NUT       **Specify low=1-3/4"  or  high=2-1/8"-2-3/4" knob style & plane model No.  When in doubt, measure height of knob.   **Not available for No.1 Planes**   **Always in Stock**  4.95
15 PLANE HANDLE SCREW 8.95
16 PLANE BOTTOM w/Frog: No.5 Plane only   **Various vintages available, inquire**. Call or email
17 FROG ADJUSTING SCREW CLIP 4.95
46 FROG ADJUSTING SCREW                            **Always in Stock** 4.95

                BED ROCK SPECIFIC
FROG PIN  **Not available for No.602 & 603 Planes** 9.95
FROG SET SCREW 9.95

 

STANLEY BLOCK PLANES

Blockparts1.jpg (30839 bytes)

 
**All Parts are Original/Vintage Equipment Manufacture**
-No Reproductions-
No. Description Price
4 JAPANNED LEVER CAP: User Grade - minimal paint.  No.9-1/4,9-1/2,9-3/4,15,15-1/2,60-1/2,65-1/2,131,203,220 Planes Call or email
4 NICKEL-PLATED KNUCKLE JOINT LEVER CAP: User Grade - minimal plating.  No.18,18-1/4,19,65 Planes.  >>>Specify Early or Late Type: >>>See *PIC* for Type Comparisons 19.95
5 LEVER CAP SCREW:  specify plane No. 4.95
6 FROG:  No.60, 60-1/2, 65, 65-1/2 Planes 17.95
6 FROG:  No.220 Plane 17.95
8 ADJUSTING SCREW:  No.9-1/4,9-1/2,9-3/4,15,15-1/2,16,18,18-1/4,19 Planes 17.95
8 ADJUSTING SCREW:  No.140, 220 Planes 17.95
9 LATERAL ADJUSTING LEVER 17.95
16 PLANE BOTTOM only, no other parts: No.110,220 Planes only 17.95
21 THROAT ADJUSTING LEVER:  specify plane No. 17.95
22 BRASS KNOB: User Grade - knurling nicked.  No.9-1/2,18,19,60-1/2, 65 (minimal plating) Planes only. specify plane No. 17.95

 

STANLEY No.45 & 55 PLANES

Combinparts.jpg (44778 bytes)

 
**All Parts are Original/Vintage Equipment Manufacture**
-No Reproductions-
No. Description Price
23 CUTTER BOLT 9.95
24 WING NUT 14.95
25 CLIP (screw not included) 4.95
30 SLIDING SECTION: No.55 Plane only 27.95
31 THUMBSCREW 10.95
34 ADJUSTABLE BOTTOM: No.55 only 27.95
37 SCREW ADJ. for #34 PART: No.55 only 14.95
43 SHOULDER THUMBSCREW 10.95
50 LEFT FENCE: No.55 only (no wood face, but includes hardware) 59.95
51 FENCE THUMBSCREW 10.95
53 IRON W/SWIVEL (see also part #86, Machine Screws for attaching wood face) 12.95
56 RIGHT FENCE: No.55 only (no wood face, but includes hardware) 49.95
70 ADJUSTABLE DEPTH GAUGE 14.95
71 NUT for #70 PART 10.95
86 MACHINE SCREWS FOR ATTACHING WOOD FACE TO FENCE...pair 5.95

 

Best time to call is from 1:00 p.m. to 5:00 p.m., Pacific Time or whenever you can catch me
PURCHASING- Any item may be purchased by VISAMC.jpg (3635 bytes) money order, cashiers check or bank draft in U.S. Funds (purchases by money order, cashiers check or bank draft are held for 7 days pending receipt of remittance). State of Washington residents please add 8.4% sales tax to total amount of order.  Prices as listed.
SHIPPING- Prices include shipping & handling by UPS GROUND, U.S.A. addresses.   Faster delivery by UPS NEXT DAY, 2nd DAY & 3 DAY SELECT can be obtained at time of order.  Additional shipping charges may apply for orders sent to ALASKA, HAWAII, PUERTO RICO & CANADA & INTERNATIONAL destinations when shipped by USPS - AIR PARCEL POST, PARCEL POST.
RETURNS- Any item may be returned, in the same condition as it was received, within 7 days of receipt, for a refund.  Please contact me by Email or phone for return authorization.  Purchaser pays return shipping costs.  Original shipping costs non-refundable.

**All items subject to prior sale**

       To order or inquire about availability of items,  please contact me via Email: bktools@olympus.net or call (360) 452-2292. Best time to call is from 1:00 p.m. to 5:00 p.m., Pacific Time or whenever you can catch me 

BOB KAUNE - ANTIQUE & USED TOOLS - Dept WWW - 511 W. 11th, Pt. Angeles, WA. 98362

 

<<<back to HARD TO FIND PARTS

AniBlock.gif (15659 bytes)

HOME SPECIAL INFO & ORDERING TOOL OF THE WEEK SELDOM SEEN BED ROCK TYPES FAQ LINKS EMAIL

© 2000 - Bob Kaune - Antique & Used Tools for Collectors & Woodworkers. All rights reserved.

Updated: 01/28/12